《电子技术应用》
您所在的位置:首页 > 微波|射频 > 设计应用 > 一种低功耗便携式宽带射频信号检测笔的设计
一种低功耗便携式宽带射频信号检测笔的设计
电子技术应用
贾博,张润林
中国电子科技集团公司第五十八研究所
摘要: 以便携性低功耗为出发点,创新性地首次提出了检测笔形态的便携式射频信号简易测试仪,以解决高寒、高空、高热或者高海拔地区等特殊环境下检修通信设备时,携带常规实验室测试设备存在不便操作、危险性较高、插电困难等难题,该检测笔一方面显著减轻了恶劣环境中携带复杂检测仪器的负担,另一方可以将节约出来的空间和精力携带其他重要的工作物件。经试验测试,该检测笔能实现对频率为1 GHz~23 GHz、功率范围在-45 dBm~+3 dBm的射频信号的有效检测,试验结果与理论设计一致,验证了该方法的可行性和高效性。
中图分类号:TN854 文献标志码:A DOI: 10.16157/j.issn.0258-7998.256975
中文引用格式: 贾博,张润林. 一种低功耗便携式宽带射频信号检测笔的设计[J]. 电子技术应用,2026,52(1):103-106.
英文引用格式: Jia Bo,Zhang Runlin. A design of low-power portable broadband radio frequency signal detection pen[J]. Application of Electronic Technique,2026,52(1):103-106.
A design of low-power portable broadband radio frequency signal detection pen
Jia Bo,Zhang Runlin
China KEY SYSTEM & Integrated Circuit Co., Ltd.
Abstract: This paper, prioritizing portability and low power consumption, innovatively proposes a pen-shaped portable RF signal detection pen for the first time. It aims to address the challenges of inspecting and repairing communication equipment in extreme environments such as high-cold, high-altitude, high-temperature, or high-latitude regions, where carrying conventional laboratory equipment is inconvenient, hazardous, and difficult to power. The proposed detection pen not only significantly reduces the burden of carrying complex detection instruments in harsh environments but also allows for the conservation of space and energy for carrying other essential items. Experimental tests demonstrate that the detection pen can effectively detect RF signals within the frequency range of 1~23 GHz and power range of -45 dBm to +3 dBm. The experimental results are consistent with the theoretical design, thereby validating the feasibility and efficiency of the proposed method.
Key words : environment;portable;low-power;broadband detection

引言

中国各地的地貌复杂多样,在信息化飞速发展的今天,通信电子设备基础设施种类繁多,如中国的北斗卫星定位系统地面站、各类移动通信基站、移动卫星通信站等[1-4]。但是某些通信电子设备的工作环境特殊,具备高温、高寒、高海拔等特点,设备维护检修条件有限,检修工具的便携性、通用性和可操作性至关重要。

目前,关于通信电子设备检修,设备厂家一般采用两种办法进行:第一种是通过工作人员携带实验室测试仪器进行现场作业;第二种是将设备返厂检修。现场作业时,进行检修的工作人员需要携带实验室测试仪器,这些仪器具备出色的性能和丰富的功能,通常设计复杂且笨重,通信设备工作在非常恶劣的环境中时,也无法携带实验室仪器,设备检修只能返厂进行。产品返厂检修会延长检修周期,且在设备检修过程中,设备安装地存在通信中断的可能,无法满足人们的使用需求。因此必须寻求一种检测结果可视化程度高、操作简便、功耗低、重量轻、体积小、通用化的便携式检测仪[5]。检测笔形态的测试仪具有以上特点[6]。

本文创新性地设计了一种低功耗便携式宽带射频信号检测笔,用于解决通信电子设备检修时射频前端电路中射频信号幅度的探测。本文首先介绍了检测笔方案原理,然后针对检测笔实现功能过程中三个关键步骤进行阐述,即信号检测、信号处理和信号可视化。


本文详细内容请下载:

http://www.chinaaet.com/resource/share/2000006921


作者信息:

贾博,张润林

(中国电子科技集团公司第五十八研究所,四川 成都 610097)


官方订阅.jpg

此内容为AET网站原创,未经授权禁止转载。